Geometry.Net - the online learning center
Home  - Basic_A - Aviation Propulsion Bookstore
Page 4     61-80 of 95    Back | 1  | 2  | 3  | 4  | 5  | Next 20
A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  

         Aviation Propulsion:     more books (101)
  1. Wind Tunnel and Propulsion Test Facilities: An Assessment of NASA's Capabilities to Serve National Needs by Philip S. Anton, 2004-09-25
  2. Fundamentals of Hybrid Rocket Combustion and Propulsion (Progress in Astronautics and Aeronautics)
  3. Aircraft Propulsion and Gas Turbine Engines by Ahmed F. El-Sayed, 2008-02-27
  4. Base Bleed: First International Symposium on Special Topics in Chemical Propulsion Athens 1988 by Kenneth K. Kuo, 1991-07-01
  5. Aerothermodynamics of Gas Turbine Rocket Propulsion, Third Edition (Aiaa Education Series) by Gordon C. Oates, 1997-06
  6. Space Propulsion Analysis and Design by Ronald Humble, 1995-09-01
  7. Electrogravitics II: Validating Reports on a New Propulsion Methodology (No. 2) by Thomas Valone, 2005-07-01
  8. The Development of Propulsion Technology for U.S. Space-Launch Vehicles, 1926-1991 (Centennial Series of the Association of Former Students, Texas A&M University) by J. D. Hunley, 2007-07-12
  9. A HISTORY OF JET PROPULSION, INCLUDING ROCKETS by Raymond Friedman, 2010-04-15
  10. A Critical Review of Space Nuclear Power and Propulsion 1984-1993
  11. ADVANCED PROPULSION SYSTEMS AND TECHNOLOGIES TODAY TO 2020 (Progress in Astronautics and Aeronautics) by Claudio Bruno, 2008-03-15
  12. Developments in High-Speed Vehicle Propulsion Systems (Progress in Astronautics and Aeronautics) by S. Murthy, E. Curran, 1996-01-01
  13. Fusion Energy in Space Propulsion (AIAA Education Series)
  14. Advanced Chemical Rocket Propulsion (Combustion Treatise) by Y. M. Timnat, 1987-11

61. Light Plane Technologies Coming To Market
Leaders of both the Advanced General Aviation Transport Experiment (AGATE) consortiumand the NASA General aviation propulsion (GAP) program are reporting
"Planet Earth's best source for online space news" For August 1, 1998
Light plane technologies coming to market
NASA RELEASE: 98-139 The government-industry effort to revitalize the U.S. light airplane industry is rapidly turning promises into accomplishments. Leaders of both the Advanced General Aviation Transport Experiment (AGATE) consortium and the NASA General Aviation Propulsion (GAP) program are reporting impressive progress, according to a senior NASA official. "These accomplishments are laying the foundation for a small aircraft transportation system that will make personal air travel for business or pleasure a safe, affordable transportation alternative," said Michael B. Mann, NASA's Deputy Associate Administrator for Aeronautics and Space Transportation Technology. "Newly developing technologies and procedures are allowing us to move from the research stage to practical use. Even the challenging task of developing a lightweight, affordable jet engine for personal airplanes is coming along quickly through NASA's GAP program," he added. Mann's comments were made at a joint NASA, FAA and U.S. industry news briefing held Friday at AirVenture '98, the Experimental Aircraft Association (EAA) annual Fly-In and Convention, Oshkosh, WI. Other briefing participants included Anne Harlan, Federal Aviation Administration's Director of the William J. Hughes Technical Center, Atlantic City, NJ.

62. Aerospace And Aviation News
SAE AIR 5433 May 2001 Lubricating Characteristics and Typical Propertiesof Lubricants Used in aviation propulsion and Drive Systems.
Vol. 1, Issue 2
Standards Update Global Engineering Documents, an IHS Group company, is the world's premier distributor of industry, government, U.S., and non-U.S. standards, specifications and other technical publications in a variety of collections and media, from hardcopy to CD-ROM and the Internet. Global and IHS together offer a wide range of documents, publications, reference materials, information databases and more that are useful to government and military related industries. The following is a sample of products and services available that pertain specifically to Global Positioning System (GPS) technologies. To order* any of these documents, just click on the document title. For information on how to obtain an electronic document, other products and services, or to receive a FREE catalog contact Global at 800-854-7179, 303-397-7956 and mention PRIORITY CODE N13. Customers outside the U.S. should contact your local Global Info Centre - see Access Global Worldwide for a listing. * Note when ordering hardcopy documents: Effective June 15, 2001, any orders including hardcopy documents will require a $50 minimum order.

63. Sacres Engine Control
Engine control and monitoring (civil and military aviation propulsion systems).Within SACRES, two applications have been implemented by SNECMA
Engine control and monitoring
civil and military aviation propulsion systems)
Within SACRES, two applications have been implemented by SNECMA : 1.The Engine Control application (EC) :
this application is the software Control part of a turbojet engine, designed with Sildex SACRES tool. 2. The Digital Control Unit (DCU) application :
the DCU is an airframe mounted electronic package with a microprocessor based programmable digital control, for a dual engine helicopter.The DCU interfaces with cockpit controls and displays, and has a self-test feature. The DCU application is designed with Sildex SACRES tool. Context and SNECMA needs
The field of application concerns civil and military aviation propulsion systems. The demands made on such systems have been constantly increasing over the last few years. Engine thermodynamic cycles have developed considerably, and consequently so have the number of functions to be checked. To optimize the integration of these aspects and also meet the targets set by the users (pilots, airlines or air forces) regarding functional and operational performance, such as safety, maintenance, weight and cost, engine control systems are making increasing use of digital electronics.
Engine monitoring
The functions to be carried out to ensure automatic control of the engine operating point as regards its state, its environment and the pilots demands, while integrating its operating limits, are numerous and complex.

64. AMT USA, Aviation Microjet Technology
Designs and manufactures small gas turbines for the propulsion of radio controlled flying aircraft.

65. Pravin Sonawane's Page On Armament Technology
Provides links to coverage of topics including missiles, weapons, ammunition, rockets, warplanes, military aviation, simulation, tutorials, propulsion systems and electronic warfare
Pravin Sonawane's Page on
Armament Technology
Home Page The City of Pune Maharashtra Maharashtra Geet ... India India related military sites Electronic Warfare Research and Development Laboratories Industries/Manufacturers Miscellaneous ... General Engineering
This Military Weapons site is owned by
Pravin Sonawane

Next Page
Previous Random ... List Sites
Want to join the Military Weapons Ring?
Click here for info Home Page The City of Pune Maharashtra ... Maharashtra Geet

66. Net-Music
Page for TealPoint Software Advanced Topics in Aerodynamics, Computational FluidDynamics, Aeronautics, aviation, propulsion Systems, Design Kevin's Online
Some Links
Counter 2.3 Documentation
Collection of GIF's
Freeware for Solaris
Count 2.5 Documentation ...
Radio Free World- WebRadio Guide - Find stations and programs from around the world
WAM Records
Palm, Inc. Customer Support
A Guide to Russian Airliners
LEO-Dict ...
The NPAC Visible Human Viewer

67. SBIR 2001 Phase I: TOPIC A1 Aviation Safety
retrofitability to the commercial transport, general aviation, and rotorcraft predict,diagnose, and prevent safety significant propulsion system malfunctions.
National Aeronautics and Space Administration
Small Business Innovation Research 2001 Program Solicitation
TOPIC A1 Aviation Safety
back to Solicitation back to Chapter 8.1.1 back to Chapter 8.1 back to Chapter 8 ... back to table of contents Flight Deck Situation Awareness and Crew Systems Technologies
Propulsion and Airframe Failure Data and Accident Mitigation
Automated On-Line Health Management and Data Analysis
Aircraft Icing Systems
Non-destructive Evaluation and Health Monitoring of Structures and Materials NASA is responsible for conducting the research that, upon implementation, will contribute to an 80 percent reduction in aviation accidents by 2007, and a 90 percent reduction in aviation accidents by 2017 relative to 1997. Accomplishment of these goals requires technical advances in the following areas: (1) Increased safety for all aircraft flying in an atmospheric icing environment; (2) Prevention and/or mitigation of hazardous conditions during or after an aviation accident; (3) Enhanced flight deck situational awareness for the National Airspace System operators; (4) Automated on-line health management and data analysis for aircraft systems; (5) Innovative and commercially viable techniques for non-destructive evaluation and health monitoring of aircraft materials and structures. A 1.01 Flight Deck Situation Awareness and Crew Systems Technologies

68. General Aviation Aircraft Propulsion Systems: Practical Concepts & New Direction
. Provides...... General aviation Aircraft propulsion Systems Practical Concepts andNew Directions. Instructor Ray Taghavi. Course
Main Page Course List Schedule Instructors Information Register On-Site Courses Distance Learning Travel and Hotels FAQ
August 11-15, 2003 The University of Kansas
Lawrence, Kansas Course Number: Monday-Friday:
8:30 a.m.-4:30 p.m. "The GAP short course was an excellent in depth review of the fundamentals of mature and groundbreaking GA technology. This course was suitable for mechanical designers, engineers, and approval authorities alike." James Moore, The New Piper Aircraft Company "Being an electrical engineer, the course offered me an excellent and comprehensive understanding on propulsion and engines. The course met and exceeded my expectations. Dr. Taghavi provided the class with quality and superior instructing skills and knowledge." 2002 participant, Transport Canada "The course is well prepared and presented. One of the best I ever attended. Very informative and more than what I thought I would get. The course book has become a standard for me. Excellent professor and well informed." S.M. Nagarajan, FAA

69. Aviation Safety Engineer (Propulsion) Training Curriculum
Skip to Main Content Aircraft Certification Training ProgramAviation Safety Engineer (propulsion) Training Curriculum.
Aircraft Certification Training Program
Aviation Safety Engineer (Propulsion) Training Curriculum Aircraft Certification
Products and Services Page
Aircraft Certification
Training Page
... Other Training
1. What courses are an Aviation Safety Engineer (Propulsion) required to take and in what recommended sequence? 2. What are the video/self study materials available to an Aviation Safety Engineer (Propulsion)? 3. How do I obtain a copy of the above video/self-study materials? 4. What other training is recommended to an Aviation Safety Engineer (Propulsion)?

70. Aviation Week & Space Techonolgy Propulsion
AERONAUTICS/propulsion. 2001, Robert F. Faulkner, Joaquin H. Castro,Curtis W. Berger Pratt Whitney Space propulsion. Robert
Robert F. Faulkner, Joaquin H. Castro, Curtis W. Berger
Robert Mercier
U.S. Air Force Research Laboratory Fabrice Bregier, Alan Garwood, Mario di Donato
MBDA Mauricio Botelho
Boris Katorgin
Vladimir Chvanov
Lawrence Tanner
Robert Ford
John Karas Moshe Keret Serge Dassault Jean Pierson Phil Condit
Alan Mulally
Ronald Ostrowski Dale Hougardy Ray Morgan Bob Curtin Charles H. Kaman Laurent Beaudoin Daniel M. Tellep Bernard Ziegler Pierre Baud Jacques Troyes Lt. Col. Felix Sanchez Jean-Luc Lagadere Jean-Luis Gergorin Philippe Camus Thomas V. Jones Ben Rich rev. 7/8/99 Spencer

71. 21021, Aviation Safety Engineer/Propulsion 14 CFR Training
FAA Course Catalog. 21021, aviation Safety Engineer/propulsion 14CFR Training. Training Manager AMA220, Course Length 68 hours.
FAA Course Catalog
21021, Aviation Safety Engineer/Propulsion 14 CFR Training
Training Manager:   AMA-220 Course Length:   68 hours Course Description:   This course provides discipline-specific training in the technical aspects of propulsion certification engineering, including engine and propeller type certificaton, and aircraft (propulsion system installation) type certification. Design approval, production approval, and continued operational safety considerations are included. Designees/delegations - 50% discount. Prerequisites:   And any of the following:
Previous Page

Back to Catalog Home Page

72. Forums ESA Propulsion System Proposals In Doubt (Aviation Week
Forum NewsFlash ESA information and strategy Info ESA PropulsionSystem Proposals in Doubt (aviation Week Space Technology).
No Admin
Forums Forum: NewsFlash - ESA information and strategy No Replies
Industry Home
ESA Home

73. Next Century Of Flight: Aviation Week's
On the nuclear side of the program, electric propulsion work will be done by MarkCappelli of Stanford University, James National aviation Hall of Fame Dinner.

Advanced Search
NEWS Nuclear Power Not Only Arrow In NASA Space Propulsion Quiver
Frank Morring, Jr. / Washington
NASA is looking beyond nuclear power as it studies technologies to improve the efficiency of future deep-space missions, with some $70 million tentatively programmed to push technology that uses either nuclear power directly, or supplements it, to get beyond the limitations of chemical propulsion for space science probes. Aerocapture uses friction with an atmosphere to slow a spacecfraft, enabling orbital missions otherwise impractical due to the amount of fuel they would require. In addition to electric propulsion systems that use the power from nuclear reactors to drive spacecraft, the agency's Office of Space Science is studying high-temperature materials and structures to handle the heat of atmospheric braking, and huge solar sails for propulsion. Under a new "In-Space Propulsion" (ISP) program started in the current fiscal year, the office has named engineering teams to push several different technologies to "Technology Readiness Level 6," just short of a system demonstration. "The program is focused on developing advanced propulsion technologies looking at near- and mid-term NASA science missions, primarily," said Paul Wercinski, ISP program executive at NASA headquarters. "What we're trying to do is get these different propulsion technologies to a state of readiness such that when mission priorities get better defined, then the mission planners will have these technologies that they can reach for to use."

74. UAH: Research: Aviation And Rocket Propulsion
When scientists in UAH's propulsion Research Center talk about hot stuff, don'tget too excited They're probably referring to using wastewater in spacecraft
Aerospace super soaker is new rocket idea When scientists in UAH's Propulsion Research Center talk about hot stuff, don't get too excited: They're probably referring to using wastewater in spacecraft propulsion. The H O Thermionic Solar Thermal Upperstage Flight - H OTSTUF - is a concept generated by graduate student Jonathon Jones, who came up with the idea of using excess water on spacecraft as a propellant. The water is superheated into steam by concentrated solar energy, then is seeded with particles that are easily ionized, such as potassium. The result of this "seeding" is a conductive gas or plasma, which is accelerated through a thermodynamic nozzle. Such electric propulsion devices using plasma flows can deliver much greater performance than traditional chemical propulsion systems, resulting in lower costs and larger payloads that can be delivered into orbit. Research in UAH's Propulsion Research Center is aimed at developing a basic understanding of how to extract maximum performance from these types of systems. Research scientists at UAH built a vacuum chamber in which to study exhaust plumes from a microwave thruster to see how different kinds of fluids behave in a variety of simulated space environments. Scientists want to determine the performance for different types of gases and compare these with the wastewater-to-steam concept to identify the most attractive approach.

75. UAH: Research: Aviation And Rocket Propulsion
is the goal of ongoing research at UAH, where scientists are designing and testinghardware applicable to a rocketbased combined cycle (RBCC) propulsion system
Controlling gas mix could aid rocket design Getting a spacecraft off the surface of the Earth, through the upper atmosphere and into the blackness of space is no longer a challenge for most industrialized nations. Taking those same steps using a low-cost, single-stage reusable rocket, however, is a new challenge. Meeting that challenge is the goal of ongoing research at UAH, where scientists are designing and testing hardware applicable to a rocket-based combined cycle (RBCC) propulsion system. An RBCC system would use oxygen from the atmosphere during portions of the flight, reducing vehicle weight since the vehicle wouldn't have to carry as much oxidizer. The UAH test program explores means to facilitate greater control over the mixing of gases from turbine and primary rocket exhausts in the RBCC. "We can increase the efficiency of RBCC propulsion systems by how we control the mixing of those gases," says Dr. Clark Hawk, director of UAH's Propulsion Research Center. "We want the mixing of those gases to occur in a very particular way. The hardware we design and the conditions under which it operates will let us exert some measure of control over that mixing." Rockets or missiles using this RBCC technology could be launched horizontally, much like an airplane, or vertically from the ground.

76. Aerospace Links
Basic Aircraft Design (BAD), Design a Subsonic Jet Transport. General aviationpropulsion Program (GAP), Research on propulsion Systems for General aviation.
Aerospace Links
The Aerospace Corporation
Research, Development, and Advisory Services Research, Development, and Advisory Services Air Force Flight Test Center Edwards Air Force Base Flight Testing Aircraft Designs, Inc. Aircraft Design and Engineering Firm General Aviation Parts Supplier American Institute of Aeronautics and Astronautics (AIAA) Aerospace Professional Society University of Kansas Chapter Stanford University Chapter AIRBUS European Aircraft Manufacturer Allison Engine Company Gas Turbine Manufacturer Aircraft Owners and Pilots Association (AOPA) Pilots Association Aviation Week on the Web Ayres Corporation Aircraft Manufacturer Bell Helicopter Helicopter Manufacturer BMW Rolls-Royce Engine Manufacturer Boeing US Aerospace Company Cessna Aircraft Company General Aviation and Business Jet Manufacturer Cirrus Design General Aviation Manufacturer CFE Turbofan Engine Manufacturer CFM Turbofan Engine Manufacturer Composites Search Engine Search Engine for Information and Products Related to Composites DARcorporation Airplane Design Software, Textbooks, and Consulting

77. Department Of Aviation & Technology - BS In Aviation
74 Aircraft Structures; Avia 98 aviation Safety; Avia 134 propulsion;Avia 141 Human Factors in the aviation Environment; Avia 167 Senior
The offers two different concentrations in its BS in Aviation: Maintenance and Operations. There are three different options under the Operations concentration: Administration, Flight Operations, and Maintenance Management. Click below for more details on each of these concentrations
Back to the top
Aviation Operations
The Aviation Operations concentration is designed for students interested in flight, technical, and business aspects of the aviation field. Students select one of three options within the Aviation Operations concentration: Flight Operations, Maintenance Management, or Administration. It is a 132 semester unit program. The core curriculum is designed to provide a broad business and scientific background for the student. Students must take a minimum of 69 semester units in the Aviation (Avia) major. Aviation Operations graduates are employed in positions in various areas including flight, airport management, purchasing, marketing, general aviation management, technical management, and military aviation. The curriculum provides an excellent background for the professional pilot.

78. Federal Aviation Regulation Sec. 34.62 - Test Procedure (propulsion Engines).
Federal aviation Regulations. Back to Index of Part 34 Back to Federal aviationRegulations Home. Sec. 34.62 - Test procedure (propulsion engines).
Aircraft Performance Charts Aviation Regulations Aviation Links Aviation Books ... Aviation Databases Federal Aviation Regulations Back to Index of Part 34 Back to Federal Aviation Regulations Home
Sec. 34.62 - Test procedure (propulsion engines). (a)(1) The engine shall be tested in each of the following engine operating modes which simulate aircraft operation to determine its mass emission rates. The actual power setting, when corrected to standard day conditions, should correspond to the following percentages of rated output. Analytical correction for variations from reference day conditions and minor variations in actual power setting should be specified and/or approved by the Administrator: Class Mode - TP TF, T3, T8 TSS Taxi/idle........................... (*) (*) (*) Takeoff............................. 100 100 100 Climbout............................ 90 85 65 Descent............................. NA NA 15 Approach............................ 30 30 34 *See paragraph (a) of this section. (2) The taxi/idle operating modes shall be carried out at a power setting of 7% rated thrust unless the Administrator determines that the unique characteristics of an engine model undergoing certification testing at 7% would result in substantially different HC and CO emissions than if the engine model were tested at the manufacturers recommended idle power setting. In such cases the Administrator shall specify an alternative test condition.

79. Propulsion
For aviation, propulsion is generally broken into 2 categories airbreathingpropulsion for airplanes and rocket propulsion for spacecraft.
Introduction page 1
Propulsion is the science of designing an engine to propel a vehicle forward or up. For aviation, propulsion is generally broken into 2 categories: air-breathing propulsion for airplanes and rocket propulsion for spacecraft. Both work on the principle of pushing high velocity exhaust gases out the back end (reaction thrust principle), but they differ in one significant detail. An air-breathing engine uses the air stream in which the airplane is flying to augment the propulsive abilities of the engine so it can carry less fuel. A rocket engine travels in space where there is no air, and therefore it must carry all its fuel internally. An air-breathing engine will have both an inlet and an exit, while the rocket will be closed in the front and only have an exit. In general, an air-breathing engine will get more thrust for less fuel than a rocket. The forces of flight (lift, drag, weight, and thrust) were discussed in the Fundamentals chapter. Thrust is the forward facing force generated by the engines of the airplane. The air flows into the engine at roughly the flight speed of the airplane, and it exits the engine flowing much hotter and faster. The thrust is computed using the rate of mass flowing through the engine times the difference between the high velocity of the exhaust gases and the original velocity of the air into the inlet. The exhaust gases flow out the back of the engine, causing a reaction force on the airplane, pushing it forward. This concept is called the reaction thrust principle.

Back. Print Page. STANLEY aviation JOINS 728JET propulsion SYSTEM PRODUCTTEAM Paris Air Show, Le Bourget, June 15, 1999. Left to Right
Le Bourget, June 15, 1999 Left to Right: Ken Greene, President/CEO - Stanley Aviation, Jack Pelton, Sr VP, General Manager 728 Jet Aircraft Family - Dornier, Michael L. Meshay, President Aircraft Components and Services - Fairchild Aerospace, Richard Annut, Managing Director - FR HiTEMP Stanley Aviation Corp . was selected today by Fairchild Aerospace Corporation to join the elite 728JET Propulsion System integrated product team. Stanley responsibilities include design, development, qualification, fabrication, and in-service support of the fuel piping system and components. Carl Albert, Fairchild Chairman and CEO, announced at the Paris Air Show that the current order book, including firm orders and options, totals 160 728JETs, 28 Envoy 7s, 163 328JETs, and 85 428JETs. Denver based Stanley Aviation Corporation offers a wide array of fuel, air and hydraulic systems and components to the aerospace and defense community and is a member of the Wimborne, England, based Cobham plc.

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  

Page 4     61-80 of 95    Back | 1  | 2  | 3  | 4  | 5  | Next 20

free hit counter