61. Russian And Soviet Military Aircraft Su24, Sukhoi 'Fencer', A variable geometry strike/attack aircraft, obviously inspiredby the US F-111, but more optimized for the low-level tactical strike role http://www.armscontrol.ru/atmtc/Arms_systems/Avia/Russia/Sukhoi_Aircraft.htm

Russian and Soviet Military Aircraft SUKHOI DESIGN BUREAU, Moscow, Russian Federation BB-1, Sukhoi Renamed Su-2 I-107, Sukhoi See Su-5 I-330, Sukhoi See Su-1 I-360, Sukhoi See Su-3 P-1, Sukhoi Experimental fighter. The P-1 was a tailed two-seat delta. It had oval jet intakes just ahead of the wing root, with twin shock cones. Armament was rectractable rocket launchers in the nose, behind the radar. The big P-1 was underpowered with the single Lyulka AL-7F engine. No production. Type: P-1 Function: fighter Year: 1958 Crew: 2 Engines: 1 * 10600kg Lyulka AL-7F Wing Span: 9.50m Length: 21.30m Height: Wing Area: Empty Weight: Max.Weight: Speed: 2050km/h Ceiling: 19500m Range: 2000km Armament: 50*r57mm 1*g37mm P-42, Sukhoi A stripped version of the Su-27 , without armament or electronics, used to set time-to-height records. PT-7, Sukhoi Development of the T-3 with a variable-geometry inlet. PT-8, Sukhoi A development of the Su-9 series, and prototype for the Su-11 S-1, Sukhoi Prototype of the Su-7 S-2, Sukhoi Prototype of the Su-7.

62. Automation For Nondestructive Inspection Of Aircraft - Siegel ( Technologies for aircraft Skin Inspection Mel Siegel (1997) (Correct) 0.3 IEEETRANSACTIONS ON MAGNETICS. VOL. 31, NO. 3. MAY 1995.. - geometry Prnel Nd http://citeseer.nj.nec.com/siegel94automation.html

63. Barnes Wallis 'An Introduction To The Work of A Genius' by Ian Bayley. Brief biography, with photographs.Category Regional Europe Scientists Wallis, Sir Barnes Neville...... If his designs for a 'variable geometry' aircraft were continued Britain couldhave led the world in aircraft design but funds were not available. http://freespace.virgin.net/ian.bayley/ARTICLES/wallis/wallis.html

Barnes Wallis An Introduction To The Work of A Genius by Ian Bayley Barnes Wallis is one of Britain's great unsung heroes. Should his name be recollected at all it is usually associated with the bouncing bomb of world war two fame and then promptly forgotten. Yet this man whose life spanned from the early days of flight to the advanced jet engine had a gift of inventiveness coupled with design that was nothing short of genius. It is unfortunate that due to political wrangling, economic problems and a little bad luck he never received the recognition he deserved outside of a small group in the aeronautical industry. Born in 1887 of a middle class yet hard-up family, Barnes Neville Wallis was sixteen when the Wright Brothers made their first successful flight on 17th December 1903. This was not something that particularly attracted his attention and he left school in 1904 with little in the way of qualifications and no job. After an apprenticeship at an engineering company followed by work at a shipyard on the Isle of Wight Barnes finally came into contact with airships and on 1st September 1913 attained the post of Chief Assistant in the Vickers Airship Department. Although he was to remain surprisingly loyal to Vickers over the years to come, it was here that he encountered the political wrangling and government interference that was to frequently frustrate him. The R100 Airship - Built using a geodetic design Despite many obstacles, including several periods of unemployment, Barnes brought a fresh and unique approach to airship design. First by creating the R80 and then by producing the R100 which used geodetic principles in its production. These airships were unlike any others created but due to political reasons Barnes was to suffer the disappointment of seeing both of these unique craft scrapped within months of their launch

64. Department Of Aerospace Engineering At MSU : Aerospace Course Descriptions : Sys vocation. 3,4,6,7,8; Introduce the aircraft geometry definitionconcepts necessary for analysis and fabrication. 3; Introduce http://www.ae.msstate.edu/classes/descriptions/ase4613.html

GENERAL INFO ADMISSIONS RESEARCH CLASSES ... BACK ASE 4613. Systems Design (3) CATALOG DATA: Prerequisites: ASE 4343 ASE 4123 ASE 3213 . Two hours lecture, three hours laboratory. Problem synthesis; layout; weight analysis; aerodynamics; parameters; thermal environment; propulsion analysis; human factors; structural analysis; system optimization; cost effectiveness. PREREQUISITES BY TOPIC: Incompressible aerodynamics Static stability and control. Aircraft performance. Aircraft structural analysis. CAD graphics TEXTBOOK: Raymer, Aircraft Design: A Conceptual Approach , AIAA, 1992 edition. COORDINATOR : A. George Bennett, Professor of Aerospace Engineering and Director of Raspet Flight Research Laboratory. OBJECTIVES: The numbers in brackets show the relationship with aerospace engineering program objectives. Introduce the procedure for the preliminary design of an aircraft. [3] Show the inter-relationships between the major topics studied in the Aerospace Engineering curriculum. [3] Show that the aircraft configuration is based on quantitive relationships and that the quality of the design is dependent upon the fidelity of the design modeling. [2,3]

65. Name Became R.2 research engine. Variable geometry ramjet for cruise applications ie aircraft. BS.1006variable geometry ramjet for cruise applications ie aircraft. http://www.skomer.u-net.com/projects/ramjets.htm

United Kingdom Aerospace and Weapons Projects Ramjets and related projects 150203 L = length, S = span, W = weight, R = range, = diameter Name Description Remarks Particulars Bristol RP 1 Integrated wing engine for EEA P.10. Napier ramjet wing. Section bench tested at NGTE. Bristol may have helped Napier. Lost out to Avro 730 in OR.330. Cancelled 56. N/A Bristol RP 2 Large Avro stand-off bomb with 2 x 32 - 36in diameter ramjets. Possibly for early Blue Steel Mk2. N/A Bristol RP 3 Ramjet proposal for the SR 177. N/A N/A Bristol RP 4 Vickers stand-off bomb. N/A N/A Bristol RP 5 Blue Steel with Ramjets. May have become Blue Steel Mk2. Cancelled. N/A Bristol RP 6 Handley Page stand-off bomb with 2 x 40in (9ft²) ramjets. N/A N/A Bristol RP 7 Extension of XRD CRRTV leading to Bobbin M3 test vehicle. N/A Bristol RP 8 TV guided missile (RPV). Low level M1.5 @ 5000ft. R=100miles (160Km) Bristol RP 9 Swedish missile, (SSM) Surface to surface missile, possibly the Rb.315 anti-ship missile. N/A Bristol RP 10 Long range fighter (possibly based on EEA P.10). After losing out to Avro 730, EEA proposed P.10 as long range fighter.

66. PC Aviator Direct - X-Plane 6 airplane will fly! You enter the geometry of the aircraft, and XPlanewil l FIGURE OUT how it will fly based on that geometry. http://www.pcaviator.com.au/shop/xplane6.htm

X-Plane Version 6 X-Plane Version 6 For Windows Plus Worldwide Scenery CDs Includes FREE Updates through to Version 6.99 Check the X-Plane website for the latest version 6.xx updates. X-Plane is the world's most comprehensive, powerful flight simulator, and has the most realistic flight model available for personal computers. Welcome to the world of props, jets, single- and multi-engine airplanes, as well as gliders, helicopters and VTOLs such as the V-22 Osprey and AV8-B Harrier. X-Plane comes with subsonic and supersonic flight dynamics, sporting aircraft from the Bell 206 Jet-Ranger helicopter and Cessna 172 light plane to the supersonic Concorde and Mach-3 XB-70 Valkyrie. X-Plane comes with about 40 aircraft spanning the aviation industry (and history), and several hundred more are freely downloadable from the internet. Weather is variable from clear skies and high visibility to thunderstorms with controllable wind, wind shear, turbulence, and microbursts! Rain, snow and clouds are available for an instrument flying challenge, and thermals are available for the gliders! Real weather conditions can be downloaded from the internet, allowing you to fly in the actual weather that currently exists!

67. Lockheed Martin Tactical Aircraft Systems - Ft. Worth, TX : Fuel System Simulato The more accurate duplication of the aircraft integral tank geometry and structurealso allows better testing of the F22 on-board inert gas generating http://www.bmpcoe.org/bestpractices/internal/lmtas/lmtas_18.html

Search Entire BMP Web Site Survey Reports for Overview Best Practice Surveys (HTML Format) Best Practice Surveys (PDF Format) Search Best Practice Surveys ... Previous Page Lockheed Martin Tactical Aircraft Systems - Ft. Worth, TX Original Date: 08/07/1995 Revision Date: 12/17/1999 Best Practice : Fuel System Simulator Lockheed Martin Tactical Aircraft Systems (LMTAS) has developed a Fuel System Simulator (FSS) as an important tool in conducting aircraft fuel systems testing. Innovative design and fabrication procedures used in the design and building of simulated fuel tanks for the F-22 FSS are helping improve quality and lower program costs. The FSS facilitates comprehensive systems level testing early in a development program and at a lower cost than conducting testing on a ground or flight test aircraft. The test article includes a shipset of actual aircraft plumbing such as pumps, valves, tubing and instrumentation. This plumbing is installed into a set of full-scale, simulated fuel tanks and monitored and controlled with aircraft processors and software. Test equipment is provided at the FSS to simulate aircraft ground and in-flight environments and other parameters that impact the operation of the fuel system. Equipment is also provided to allow in-flight and ground refuel testing and defueling. This FSS test equipment provides test conditions and allows the aircraft hardware and controls to respond to those conditions in a laboratory environment.

68. X31 Aircraft Configuration The aircraft is a supersonic aircraft with canards instead of a horizontal tailto control the pitch of the aircraft. The geometry modeled includes the wings http://www.centaursoft.com/examples/aerospace/x31/

X31 Aircraft Configuration The X31 is an experimental aircraft developed to test ultra-high maneuverability via the use of thrust vectoring. The aircraft is a supersonic aircraft with canards instead of a horizontal tail to control the pitch of the aircraft. The geometry modeled includes the wings, fuselage, tail, canards, engine inlet and the engine outlet. View Mesh Surface Mesh Hybrid Mesh - Isometric View Hybrid Mesh - Planar View The final grid contains: 996834 Total Nodes 2670521 Total Elements 1536906 Prisms 21989 Pyramids 1111626 Tetrahedra 107257 Total Boundary Faces 380 Panels 15 Boundary Groups 23126 faces in group: Fuselage 1799 faces in group: Farfield 15105 faces in group: Symmetry 7176 faces in group: Canard 636 faces in group: Canopy 7336 faces in group: Vertical Tail 5852 faces in group: Horizontal Half Tail 309 faces in group: Engine Outlet 627 faces in group: Engine Outlet Passage 157 faces in group: Engine Inlet 4361 faces in group: Engine Inlet Passage 4768 faces in group: Inboard Hardpoint 4621 faces in group: Outboard Hardpoint 24879 faces in group: Wing 6505 faces in group: Forewing All images shown have been produced using FieldView from Intelligent Light

69. 4.2 Aircraft Geometry John Wooten, 4.2 aircraft geometry, Luft Spion. Selection of the geometryof an aircraft is a primary determinant of aircraft performance. http://students.db.erau.edu/~kovalk/4_2.html

70. Sensor Placement Visualization two optional arguments. sensor s sensor.dat -g aircraft.geometryA -s can be used to specify the Sensor Placement file. If no http://www.cc.gatech.edu/gvu/datavis/projects_98/rohling/

Sensor Placement Visualization Welcome to Greg Rohling's project for CS 6393 M any modern military aircraft are often fielded with several wide field of view sensors. Most often these sensors are related to the missile warning system for detection of incoming threats. Thus, in order to detect threats from any direction, it is desired to place these sensors in a method that will provide full four Pi steradian coverage. Unfortunately, placement is limited by such considerations as flexure, vibration, airflow, and cable lengths. Also, the view of a particular sensor may be obscured other aircraft parts such as wings, fins, and pylons. These factors reduce an individuals ability to comprehend the coverage of a multi-sensor placement on a complex aircraft. T his project allows the user to interactively place multiple sensors on a three dimensional aircraft model. The software creates images of the aircraft from these sensor locations for viewing obscuration effect. These obscuration maps are also used in the projection of the view frustum onto a sphere. The field of view is also projected onto a Mercator plot for quick view of multiple sensor coverage. Outline Synopsis Sensor Placement Obscuration Mercator Plot ... Synopsis This program was developed on a Linux platform and is started from the standard Unix command line with two optional arguments.

71. Aircraft Airfoils aircraft will never go 50% faster just by changing the airfoil at the very best,you may gain a few (3 to 5) percentage points. Airfoil Design and geometry. http://exp-aircraft.com/library/heintz/airfoils.html

About the author, Chris Heintz Aeronautical engineer Chris Heintz, the designer of Zenith Aircraft Company's line of kit aircraft, is one of the most qualified and knowledgable light aircraft designers today. With prior experience from Aerospatiale, de Havilland, and Avions Robin (France), Heintz has designed and introduced more than 12 successful kit aircraft designs. Recently, the ZENITH CH 2000 design was put into production as a standard FAA type-certificated production aircraft. Heintz regularly shares his design and construction expertise as a speaker to aviation groups and students of aeronautical engineering, and is a regular speaker at both the EAA Oshkosh and Sun'n Fun fly-in conventions. An aeronautical engineer, Heintz has the unique ability of being able to simplify design concepts and to clearly explain and illustrate light aircraft design and construction. Chris Heintz' articles were published in the Experimental Aircraft Association's (EAA) Light Plane World or Experimenter publications. AIRFOILS By Chris Heintz Part 1 We have to keep in mind that the airfoil of our flying surfaces is only one variable of the many components which makes our airplanes fly well - or not so well - in a range of possible configurations. When we do an investigation of any part of our aircraft we must not look at this part as THE solution, rather we must always remember that it is only one part of a whole. Analysis is necessary; but only a synthetic view will give us the whole picture. It is a bit like somebody trying to understand the human body by studying the skeleton only, or the chemicals of the body only, etc.: the failure of modern medicine comes from this fact. Scientists look at the parts of a corpse and decide they know something about a living body!

72. Overset Aeroelastic Simulation The use of overset grids reduces the amount of time required to generate a gridsystem to model a complex geometry, such as a full aircraft with highlift http://sdcd.gsfc.nasa.gov/ESS/annual.reports/ess98/rizk.html

Applications Overset Aeroelastic Simulation on Parallel Computers Principal Investigator: Yehia M. Rizk (NASA Ames Research Center) Co-Investigators: Ken Gee (MCAT), Ferhat Hatay(MCAT), Jahed Djomehri(CALSPAN) Objective The objective of this work is to integrate an overset Navier-Stokes flow solver with a modal structural code to computationally determine the effects of aeroelasticity on the aerodynamic characteristics of aircraft using massively parallel computers. Approach A modal structural code was integrated into the OVERFLOW code, which solves the Navier-Stokes flow equations using overset grids to model the geometry. The initial development centered on the PVM version of the parallel OVERFLOW code. With the development of an MPI version of OVERFLOW, an MPI version of the aeroelastic code was developed as well. Arrow-wing-body tip deflection convergence history. Accomplishments A new MPI version of a parallel, overset, aeroelastic code (OVERAERO) was developed based on the OVERFLOW and modal structures codes. The OVERAERO code can compute the aeroelastic deformation of a surface due to the aerodynamic loads generated by the surface. Multiple structural surfaces can be computed for a given geometry, each with its own modal data set. Rigid structures attached to a flexible surface, such as a nacelle attached to a wing, are moved according to the deflection of the attachment region on the flexible surface. Flexible surfaces, for which no modal data are available, such as a slat or flap attached to a wing, can be deflected by assuming the deformation mirrors the wing deformation.

73. New Aircrafts For Aerofly Professional Workshop By Rodeo aircraft/rF86/rF86.obj , Leftgear ) cd / zurück zur Basis Append tmgeometricobject http://www.rc-sim.de/workshop/afp/neue_modelle_fuer_aerofly_pro.htm

Neue Modelle für Aerofly Professional Workshop von rodeo Setup: Nimm den gleichen Namen für das Verzeichnis und die Dateien. Vermeide alle problematischen Zeichen wie Leerstellen, Umlaute usw. Kopiere ausserdem die tmg- und tmd-Dateien von einem ähnlichen Flugmodell in deinen neuen Ordner und benenne sie auf den neuen Namen um. Dies ist die endgültige Struktur: newmodel.bmp newmodel.obj newmodel.tmg newmodel.tmd thumb.bmp eventuell: A. Graphische Konstruktion Für ein neues Modell benötigen wir ein 3D-Maschenmodell. Ich schlage vor, aus folgenden Gründen Metasequoia LE zu verwenden: Es ist FREEWARE, macht also Raubkopieren überflüssig Es ist einfach zu bedienen Es kann viele der Operationen, die wir für die Modellerstellung benötigen Es ist ein schlankes Programm und enthält keinen überflüssigen Ballast (Animationen usw.) Es gibt einen Konverter von Metasequoia LE zu easyfly/piccofly und afpro Metasequoia LE kannst du hier runterladen: http://www1.sphere.ne.jp/mizno/main_e.html

74. Uiuc_aircraft.h.html FILENAME uiuc_aircraft.h DESCRIPTION creates maps for all keywords and variables expected in aircraft input file, includes all parameters that define the aircraft for use in the uiuc aircraft models. http://aa10.aae.uiuc.edu/~fgear/data/uiuc_aircraft.h.html

FILENAME: uiuc_aircraft.h DESCRIPTION: creates maps for all keywords and variables expected in aircraft input file, includes all parameters that define the aircraft for use in the uiuc aircraft models. STATUS: alpha version REFERENCES: HISTORY: 01/26/2000 initial release 02/10/2000 (JS) changed aeroData to aeroParts (etc.) added Twin Otter 2.5 equation variables added controlsMixer to top level map 02/18/2000 (JS) added variables needed for 1D file reading of CL and CD as functions of alpha 02/29/2000 (JS) added variables needed for 2D file reading of CL, CD, and Cm as functions of alpha and delta_e; of CY and Cn as function of alpha and delta_r; and of Cl and Cn as functions of alpha and delta_a 03/02/2000 (JS) added record features for 1D and 2D interpolations VARIABLES: INPUTS: none OUTPUTS: none CALLED BY: uiuc_1DdataFileReader.cpp

75. Britain, UNSCOM And Iraq the German Navy. It is a twinseat, twin-engined, variable geometryaircraft and is supersonic at all altitudes. The Tornado is http://special.fco.gov.uk/forces/aircraft.shtml

HOME English language LATEST NEWS Video footage Photographs BRITISH FORCES British forces deployed in the Middle East Aircraft factsheets (Tornado, Jaguar, VC10) ... Armilla patrol) BACKGROUND (also available in Arabic What is UNSCOM? Iraq's Weapons of Mass Destruction Iraqi obstruction ... Is UNSCOM still necessary? HUMAN RIGHTS IN IRAQ Human rights violations Repression of groups What Britain is doing to help LINKS Related sites Browse UN Security Council Resolutions Aircraft factsheets Click to jump to: Tornado Jaguar TORNADO The Tornado GR1 is the mainstay of the strike/attack force. Designed and built as a collaborative project in the UK, Germany and Italy, the Tornado is in service with all three air forces and the German Navy. It is a twin-seat, twin-engined, variable geometry aircraft and is supersonic at all altitudes. The Tornado is capable of carrying a wide range of conventional stores, including the JP233 anti-airfield weapon, the ALARM anti-radar missile, and laser-guided bombs. The reconnaissance version, designated the GR1A, retains the full operational capability of the GR1. The GR1B, equipped with Sea Eagle air-to-surface missiles, undertakes the anti-surface shipping role. For self-defence, the Tornado carries Sidewinder air-to-air missiles and is fitted with twin internal 27mm cannons. Powerplant: Two afterburning Turbo Union RB199-103 turbofans of 15,800lb st.

76. 100 Most Significant Aircraft Of The Past Century 100 Most Significant aircraft of the Past Century The list of aircraft deemed the most significant of the past century is both fluid and organic. of effect a particular aircraft had on the development of While some selected aircraft may have been built in production http://www.chicagocentennialofflight.org/century_craft.html

100 Most Significant Aircraft of the Past Century E-mail your selection to DShoss@cityofchicago.org 1903 - Wright Flyer The Wright Flyer was the finest example of the application of the scientific method to research and development. The Wright flyer conquered the three primary challenges identified by two brothers Wilbur and Orville Wright; wing which could develop sufficient lift to carry itself, a power-plant, and a pilot; a craft able to be controlled in three dimensions, and an engine powerful enough to sustain flight. 1906 - Airship LZ-2 The Airship LZ-2 designed and built by Ferdinand von Zeppelin first flew on January 17, 1906 and established passenger service for over 35,000 tourists by 1914. 1906 - Santos-Dumont Bis The 1906 No 14-bis designed, constructed, and piloted by the accomplished Brazilian aerialist Albert Santos-Dumont won the Aero Club de France prize for powered heavier than air flight of a distance greater than 100 meters. This flight galvanized the continent in a flurry of experimentation and development. 1906 - June Bug Glenn Curtiss, F.A.I., winning the first American Air Trophy, offered by "Scientific American."

77. About "Environmental Research Aircraft And Sensor Technology (ERAST) Program Act Environmental Research aircraft and Sensor Technology (ERAST) Program Activities.Library Home Full Table of Contents Suggest a Link Library Help http://mathforum.org/library/view/12093.html

Environmental Research Aircraft and Sensor Technology (ERAST) Program Activities Library Home Full Table of Contents Suggest a Link Library Help Visit this site: http://daniel.aero.calpoly.edu/~dfrc/Robin/Pathfinder/Path-index.html Author: Robin Ward; California Polytechnic State University-San Luis Obispo Description: Activities based on Pathfinder, a research project taking place at NASA's Dryden Flight Research Center. ERAST Pathfinder is a lightweight, remotely piloted, solar powered aircraft weighing less than 600 pounds. Activities include: Battery Depletion and Piecewise Linear Graphing; Plotting Temperature and Altitude; Measuring Wind Speed; and Plotting Wind Speed and Altitude. From Math Activities for K-12 Teachers. Levels: High School (9-12) Languages: English Resource Types: Lesson Plans and Activities Math Topics: Basic Algebra Higher-Dimensional Geometry Euclidean Plane Geometry Graphing of Functions ... Astronomy Math Ed Topics: Interdisciplinary/Thematic Studies Suggestion Box Home The Math Library ... Search http://mathforum.org/ webmaster@mathforum.org

78. Wing Geometry Definitions This slide gives technical definitions of a wing's geometry, which is one of the Actualaircraft wings are complex threedimensional objects, but we will start http://wright.nasa.gov/airplane/geom.html

This slide gives technical definitions of a wing's geometry, which is one of the chief factors affecting airplane lift and drag. The terminology used here is used throughout the airplane industry today and was mostly known to the Wright brothers in 1900. Actual aircraft wings are complex three-dimensional objects, but we will start with some simple definitions. The figure shows a wing viewed from three directions; the upper left shows the view from the top looking down on the wing, the lower left shows the view from the front looking at the wing leading edge, and the right shows a side view from the left looking in towards the centerline. The side view shows an airfoil shape with the leading edge to the left. This airfoil is a modern, thick airfoil, which is slightly different from the thin airfoils used by the Wrights and shown below. The terminology, however, is the same. Top View The top view shows a simple rectangular wing geometry, like that used by the Wright brothers. The front of the wing (at the bottom) is called the leading edge ; the back of the wing (at the top) is called the trailing edge . The distance from the leading to trailing edges is called the chord . The ends of the wing are called the wing tips , and the distance from one wing tip to the other is called the span . The shape of the wing, when viewed from above looking down onto the wing, is called a

79. T300 Wing Geometry Rev 1.1 replaced the `tinkered with' ones. The intention was to get the aircraftback to original factory geometry and see what that produced. http://www.authrustersupport.aunz.com/records/tosgadvicet300geom.html

We had a T300 (a very fast one) in recently which we ultimately found had a major basic aerodynamic problem with it - stemming back to a substantial rebuild occasioned by an equally substantial prang following an engine failure. The research which went into tracking down what proved to be a serious and complex problem took some time, both in the air and on the ground - so is worth giving some space to. The aircraft looked like a million bucks and no expense had been knowingly spared on the re-build and subsequent `smoothing'. The owner had been in repeated contact with me regarding a roll problem - which I understood had been fixed - and ultimately I ended up doing a reasonably long distance ferry flight as part of the connection process between previous and new owners. During the ferry I was not entirely happy with the aircraft. A roll problem still existed now and then but the aircraft would fly very comfortably `hands off' at cruising speed. The aircraft carried a `NavMan' fuel monitoring system and I had difficulty keeping fuel consumption on the 582 below 21 litres per hour and not infrequently saw 24 ltrs/hr on the clock. O.K. we were going fast but the engine certainly appeared to be working harder than the particular configuration of the aircraft would suggest should be the case. This ferry flight was not one of the better ones due to a howling head wind and my unknowingly still having my previous virus problem which came back claws and all in the totally enclosed and consequently very hot cockpit. I had Joe Mikus with me and he ended up doing most of the flying while I steamed in the corner for much of the three and a half hour flight.

80. 3.0 ANALYSIS TOOLS Without circularization, complicated statistical tools rather than simple geometrywould be required to estimate access to sun reflections at the aircraft. http://www.rolandresearch.com/SRGv1/C-Report3.htm

SUN REFLECTION GEOMETRY (TECHNICAL REPORT) 3.0 ANALYSIS TOOLS Locating the Aircraft Locating the Sun Application of Sun Reflection Data 3.0 ANALYSIS TOOLS Sections-4 and 5 of this report employ the everyday tools of mathematics and physics. However, they also apply other methods. These include methods for 1) locating the aircraft, 2) locating the sun, and 3) understanding sun reflections. To understand Sections-4 and 5, it's important to provide a brief discussion of these three areas before proceeding. The section begins by discussing aircraft location. Locating the Aircraft Locating the Sun Similarly, the position of the sun is also known. Computer programs generate the sun's azimuth and elevation angle when supplied with a location, date, and time of day. The program used in this analysis comes from the United States Naval Observatory (USNO) via the Internet. The URL is: http://aa.usno.navy.mil/AA/data/ This address provides access to a page called "Data On-Line" which contains "Positions of the Sun and Moon." The program generates solar azimuth/elevation angle data at one-minute intervals for present, future, and past dates. It contains its own city coordinate file and Waco is the closest stored city location. Mt. Carmel is sufficiently near Waco to cause only small, acceptable errors in solar azimuth and elevation angle values. This was determined through an error analysis of sun position data generated by the program for nearly co-located city pairs in other areas.

Page 4     61-80 of 85    Back | 1  | 2  | 3  | 4  | 5  | Next 20