Book Description
Supervisory control and data acquisition (SCADA) technology has evolved over the past 30 years as a method of monitoring and controlling large processes. This newly revised reference book offers overviews of SCADA's component technologies, as well as details necessary to understand the big picture. SCADA processes cover areas that may be measured in the thousands of square miles, and have dimensions that may be hundreds, occasionally thousands, of miles long. Now a mature technology, SCADA includes, but is not limited to, software packages that can be incorporated in a larger system. After completing its 14 self-study units, readers should be conversant with SCADA nomenclature and architecture, understand the basic technology of the system's building blocks, understand its limitations, understand how it can benefit particular operations, and have a basis for selecting appropriate SCADA technologies for their operational requirements. ... Read more

Customer Reviews (7)

Total waste of time and money
Info: I read the 3rd edition what was published in 2004.

General: The book is easy to read and does not keep repeating itself. The chapters are ordered in a way that seems logical.

Bookcontent:
70% of the book has nothing to do with SCADA but is informing you on ways of communicating, which can be used for SCADA. This part was written in a time that a 1200 baud modem was state of the art equipment AND THAT WAS NOT 2004! The rest of the book gives you a global idea what the difference is between RTU's and MTU's and what they can do. Based on the fact that the communication part is completely outdated this will be as well. It did not give me any additional information on what I already new.

A book with a very specific orientation
This book is NOT suited for electrical engineers who want to learn SCADA. It is, however, adequate for business men or managers who would like to acquire a general (very general indeed)understanding of SCADA terminology. Themes within the book are treated superficially sometimes, with a greater depth in others (such as when addressing protocols) that is not consistent nor coherent. I do not recommend this book for a Power Systems Engineer, student of such systems, or any electric or electronic engineer that wishes to understand SCADA.

Excellent for training
For training technicians, this book provides an excellent introduction to how SCADA systems work. Most of the more detailed system information requires training and manuals from specific vendors who usually provide good information on their products but little in the way of a system-wide view.

SCADA Supervisory Control and Data Acquisition, 2nd edition
I found this book to contain mostly dated, simplistic information and believe it to be unsuitable for an engineer.It will NOT advance the expertise of anyone with even minor expertise in this field.I'm stunned that it has ISA backing and is a second edition.Don't waste your time on this book unless you need only a casual, conceptual understanding of this subject.

Very helpfull for training
I had to prepared an introduction course on SCADA system. This book by himself is a complete course. I had no trouble to find information and build a 3 days course to engineer learner. They were very satisfy with the contents of this book. Thank you for your sugestion to purchase it. ... Read more

Book Description
Dealing exclusively with underwater instrumentation, control, and communication technology for subsea oil and gas production, Subsea Control and Data Acquisition has been structured to cover relevant experience and challenges in frontier subsea developments.

Aimed at professionals active in subsea production systems, in particular those engaged in the control and monitoring of such installations, and engineers keen to keep abreast of current practice and technologies, this volume covers operational experience of long offset control and monitoring, as well as enhanced oil recovery and discusses relevant topics in subsea and hole monitoring, such as,

• Reliability
• Enhanced oil recovery
• Subsea and down hole monitoring
• Long offset control
• Subsea communication/control

Reliability of systems plays a dominant role, and the effect of regional legislation is not forgotten; this volume includes contributions from experienced experts from major oil companies to challenge the reader. ... Read more

Book Description
The biennial conferences of the Society for UnderwaterTechnology have achieved an excellent reputation for the quality oftheir presentations, which cover topics of the most acute currentinterest, as well as those at the forefront of review and development.The 1994 conference onSubsea Control and Data Acquisitionformed no exception, since it covers subjects at the cutting edge ofmodern technology.
It is a matter of increasing concern that products are becomingoverspecified, resulting in excessive costs and longer developmentschedules, while not conferring an equivalent benefit in reliabilityof the finished product.
Subsea Control and Data Acquisition is vital reading for allsubsea control system designers, manufacturers and operators,equipment consultants, application engineers, academics in the subseaengineering field, and all subsea engineers.
... Read more

Book Description
The proceedings of this important conference are aimed at those engaged in remote control and monitoring of underwater systems. All aspects of underwater engineering are covered including underwater repair and replacement. Adoption of oceanographic, defence and marine technology to meet the needs of the offshore oil and gas industry will be of particular interest.

Subsea Control and Data Acquisition will be essential reading for those in the offshore oil and gas industry who have involvement in, or responsibility for, subsea production control and monitoring systems as well as those in industry who are dealing with related technologies. ... Read more

Customer Reviews (1)

A tinkers guide for beginning PC hardware interfacing.
I first purchased this book as a technology student with an interest in PC hardware.His no-nonsense approach allows even a beginner to connect to his/her PC with little(but not zero) risk to their system.

You will find that complex projects are replaced by simple circuits to speed understanding.While there are a few project plans given, this book is more about ideas and building blocks.His use of the printer port removes the need of having to pull the case off your computer, thus providing you a great place to put your circuit.

This book will show you the basics of CHEAPLY learning to build BLOCK CIRCUITS using simple, well written C programmes and common electronic components.

But be forewarned, this book is technical. If you're unsure about the difference between a FET and a BJT, you may find the book difficult but not impossible.But if you understand some digital logic, simple structured C programming, and not afraid to connect half a LM556 for a LM5! 55, it's a great place to start learning.

It's a must for HAMs. Electronics, Physics, and Engineering Students will also find it valuable.

If you are a university science student, imagine not having to watch a thermometer but automatically log data at regular intervals!! Well worth the 12-15 bucks. ... Read more

Book Description
This digital document is an article from Bulletin (Northwest Public Power Association), published by Northwest Public Power Association on January 1, 2000. The length of the article is 1101 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Snohomish Spells success "S-C-A-D-A".(supervisory control and data acquisition)(Statistical Data Included)
Author: Mike Smith
Publication: Bulletin (Northwest Public Power Association) (Magazine/Journal)
Date: January 1, 2000
Publisher: Northwest Public Power Association
Volume: 54Issue: 1Page: 15

Article Type: Statistical Data Included

Distributed by Thomson Gale ... Read more

Book Description
This digital document is an article from Security Management, published by American Society for Industrial Security on January 1, 2004. The length of the article is 392 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: SCADA under scrutiny.(Tech Talk)(supervisory control and data acquisition)
Publication: Security Management (Refereed)
Date: January 1, 2004
Publisher: American Society for Industrial Security
Volume: 48Issue: 1Page: 36(1)

Distributed by Thomson Gale ... Read more

Product Description
This is a NAVAL POSTGRADUATE SCHOOL MONTEREY CA report procured by the Pentagon and made available for public release. It has been reproduced in the best form available to the Pentagon. It is not spiral-bound, but rather assembled with Velobinding in a soft, white linen cover. The Storming Media report number is A233724. The abstract provided by the Pentagon follows: The unfortunate events of September 11, 2001 have caused a renewed effort to protect our Nation's Critical Infrastructures. SCADA systems are relied upon in a large number of the sectors that make up the critical infrastructure, and their importance was reinforced during the massive power outage that occurred in August 2003. Growing reliance upon the Internet has emphasized the vulnerability of SCADA system communications to cyber attack. Only through diligent and continuous vulnerability assessment and certification and accreditation of these systems will the United States be able to mitigate some of the vulnerabilities of these systems. A case study presented here has validated the need for continued focus in this area. This thesis consolidates some of the research that has already been done in the area of SCADA vulnerability assessment and applies it by developing an initial vulnerability assessment checklist for Department of the Navy systems. This checklist can and should also be used in the certification and accreditation of DoN SCADA systems. A promising technology was also discovered during this research that should be explored further to secure SCADA communications. This will be touched on briefly. ... Read more

Book Description
This digital document is an article from Pipeline & Gas Journal, published by Thomson Gale on February 1, 2007. The length of the article is 2328 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Energy sector owners, operators, and system vendors team up with DOE to boost control system security.(SCADA Gets Tough)(Supervisory Control and Data Acquisition systems)
Author: Robert C. Hill
Publication: Pipeline & Gas Journal (Magazine/Journal)
Date: February 1, 2007
Publisher: Thomson Gale
Volume: 234Issue: 2Page: 26(4)

Distributed by Thomson Gale ... Read more

Product Description
This is a NAVAL POSTGRADUATE SCHOOL MONTEREY CA report procured by the Pentagon and made available for public release. It has been reproduced in the best form available to the Pentagon. It is not spiral-bound, but rather assembled with Velobinding in a soft, white linen cover. The Storming Media report number is A145724. The abstract provided by the Pentagon follows: Two recent trends have raised concerns about the security and stability of Supervisory Control and Data Acquisition (SCADA) systems. The first is a move to define standard interfaces and communications protocols in support of cross-vendor compatibility and modularity. The second is a move to connect nodes in a SCADA system to open networks such as the Internet. Recent failures of critical infrastructure SCADA systems highlight these concerns. To ensure continued operations in times of crisis, SCADA systems, particularly those operating in our critical infrastructure, must be secured. Developing an abstract generic framework for defining and understanding SCADA systems is a necessary first step. A framework can provide the tools to understand the system's functions and capabilities, and how components in the system relate and interface with each other. This thesis examines and describes SCADA systems, their components, and commonly used communications protocols. It presents a matrix approach to describing and defining the features, functions and capabilities of a SCADA system. Two small SCADA systems, using industry standard components and simulating real world applications, were designed and constructed for this thesis to provide context for applying the matrix approach. ... Read more

Book Description
"Covers all areas of computer-based data acquisition--from basic concepts to the most recent technical developments--without the burden of long theoretical derivations and proofs. Offers practical, solution-oriented design examples and real-life case studies in each chapter and furnishes valuable selection guides for specific types of hardware." ... Read more

Customer Reviews (1)

Great stuff
this book has changed my life... after reading this book i have become more confident in everyday happenings... i have got a new lease on life. this book is a must buy for all people who need to know anything about Date aquisitions and how to become popular ... Read more

Book Description
This all-in-one reference offers comprehensive, in-depth coverage of the M68HC11 to readers who will be designing real systems using this popular microcontroller. Focusing on the M68HC11 as a laboratory measurement and process control platform, it provides all the design and development tools needed to create a microcontroller-based “product” that can solve common application problems; no outside data or references are needed.Organized into four sections: Part I covers the M68HC11 microcontroller and the Evaluation Board (EVB) system; Part II features new chapters on Program Design and Designing and Writing Program Modules; Part III includes four re-written chapters on software considerations and hardware design procedures to acquire input data and provide output interface and control with the microcontroller; Part IV provides five applications chapters solving five typical engineering problems.Appropriate for anyone interested in microcontrollers or microprocessors. ... Read more

Customer Reviews (2)

DATA ACQUISITION AND PROCESS CONTROL SYSTEMS 8051
DATA ACQUISITION AND PROCESS CONTROL SYSTEMS ON 8051 MICRO CONTROLLER 8 BIT

Great Book
It is a great book, great explanations, cover most topics of the MC68HC11 microcontroller; and especially if you got the M68HC11EVB this book would be useful. ... Read more

Book Description
Why purchase expensive add-on cards or bus interfaces when you can develop effective and economical data acquisition and process controls using C programs? Using the under-employed printer adapter (that is, the parallel port of your PC), you can turn your computer into a powerful tool for developing microprocessor applications. Learn how to build a complete data acquisition system and such varied applications as a CCD camera controller, a photometer interface, and a wave form generator. The book also covers the enhanced parallel port (EPP), the extended capabilities port (ECP), interfacing analog-to-digital converters, and data acquisition under Linux. This extraordinary software approach to interfacing through the parallel port will be especially appealing to programmers involved in control systems design and device development, as well as to those who work with real-time and embedded systems.;

Key topics include; the Enhanced Parallel Port (EPP), Extended Communications Port (ECP), Analog/Digital Converters (ADC and DAC), adding bits to the parallel port, hosting an EPROM emulator, connecting to an external microprocessor, and generating digital waveforms. ... Read more

Customer Reviews (12)

Excellent
I found this book very useful. I am a master degree student and I recommend this book. The author explains all the important things to work with the parallel port.

Simple, direct, effective book
This is a book written by a person that clearly understands his job. It is also fairly complete in its scope (the use of paralell port in data acquisition and control) and simple to follow. Almost immediately you get suggestions to fullfill your needs. It is an ideal book in two situations, I think: if you are begining a project and have not a lot of experience or if you are just studying. Nobody will loose having this book.

Excellent approach to data acqusition
Dr. Gadre gives a very useful approach to using the parallel port as a general-purpose data acquisition bus. Another review of this book mentioned that it was light on ECP & EPP coverage. While yes, the chapter devoted to this is short, the material presented in that chapter is used later in the book in specific examples. Also, coverage is not limited to the DOS/BIOS environment, there is a chapter on using the parallel port under Linux. While some of the material is a little bit dated ("newer" Linux kernels according to the text are those from 1.2 on) this must be moderated by the understanding that the book was published in 1998 and undoubtedly written to a large extent in the years prior. In fact, a great deal of data acquisition even today still takes place within DOS, so any DOS-related information is still very useful, and the electronic circuits presented are virtually timeless. I didn't notice in particular any parts listed which weren't available, and most would probably be best emulated in a PLD today anyway.

My main problem with the book is the number of typos I've found so far, which is why I've withheld a star.

A very useful book
This book with its very clear exposition on the basics of using parallel port as a data acquisition and control structure makes it very easy to develop numerous applications for the PC environment easily. The book's clear explanations make it very easy to go from a primitive state to a fairly advanced state, quickly and unambigously. Although a notable gap seems to be the details of the newer parallel port modes such as ECP and operating system and application level programming for the same, the book is very useful from the point of view of using the parallel port for data gathering and analysis. I would recommend this book as almost mandatory reading for someone wishing to use the parallel port on the PC.

"Electronics Today" treatment of the subject
Relatively complete treatment of the basic Centronics and Bi-directional modes.About 5 pages devoted to EPP and ECP--nothing about protocols or support from any (modern) operating system.All examples use Bios calls which are unavailable after DOS. Looks like a re-tread of a much earlier work.Hardware-software examples are fine, but utilize many parts which have been out-of date for years. A real disapointment..I sent it back! ... Read more